If you spend any time online reading about polymer clay you will doubtless read the ominous warnings that other clayers tell you. “Don’t use polymer clay with food.” “Use dedicated tools with polymer clay.” There is much talk of “contamination”. The labels tell you to wash your hands and don’t eat while claying. And yet we read on the label that polymer clay is non-toxic. What is going on here? What is safe? What is not? I’ve looked into the issue and I’ll try to bring some clarity and eliminate some of the fear and confusion around the question, “Is polymer clay safe?”
Is Polymer Clay Safe?
- Major brands of polymer clay have been tested and are certified to be non-toxic when used as directed.
- Some plasticizers used in vinyl manufacturing have been associated with health risks, but polymer clay has not included those chemicals for many years. Non-toxic plasticizers are now used.
- It is perfectly safe to cure or bake polymer clay in your home oven.
- If you burn polymer clay, small amounts of irritating vapor can be emitted, so ventilate the room if this happens. (Prevent this by learning to bake polymer clay properly.)
- Manufacturers cannot certify their material for making food utensils, so polymer clay is not certified to be used for food contact. Here’s more about what “food safe” means.
- It’s best if you don’t use your polymer clay tools with other crafts and in the kitchen.
- Polymer clay is vinyl, and is therefore similar to the material used to make beach balls, vinyl tablecloths, aquarium tubing, and baby dolls.
- All of this is discussed in more detail below….
Is Polymer Clay Safe with Food?
If you’ve ever worked in food service, you know how there are regulations about sterilizing utensils and surfaces. Cutlery, bowls, and plates need to be washed in suitably hot water and need to be dipped in a disinfecting bath if washed by hand. Or run through a hot dishwasher. Polymer clay can readily withstand a few trips through the dishwasher, but the heat and caustic soap of a dishwasher can cause polymer to change color or break down over time. The bleach of a sterilizing solution can cause polymer clay to change color and/or degrade. The manufacturers of polymer clay don’t make it for this purpose. They make and sell polymer clay, not utensils. If you were to make bowls and want them to be food safe, then YOU would have to test your bowls. Sculpey can’t do that! And because they haven’t tested for it, they can’t recommend or endorse it for that purpose.
But just because bars of Sculpey are not certified as food safe doesn’t necessarily suggest that polymer clay is toxic. That’s a weird jump in logic!
Also, a polymer clay manufacturer can’t guarantee how a crafter will make a bowl, for instance. One person might make one that’s super smooth, but another person might use overlapping cane slices with lots of nooks and crannies. Such a bowl is impossible to be adequately cleaned and therefore unable to be considered “food safe”.
By the way, you’ve probably read people mention that “microscopic food particles get trapped and bacteria can grow”. Well, take it from the old microbiologist here (that’s me). Bacteria isn’t going to grow in your polymer clay. It doesn’t work that way. But it can certainly hide in the crevices, cracks, and surface pits. And the next thing that goes in the bowl could certainly be contaminated with it. Think Salmonella. Ew. You need to be able to fully clean and sanitize your item if you’re going to use it with food, and polymer clay just isn’t made for that. Period.
Could you use a sealer, such as Varathane, and would a bowl then be food safe? Well…Varathane isn’t designed to be used for food contact purposes either. And also, Varathane won’t hold up to a trip through the dishwasher.
Realistically, though, is polymer clay safe to make a decorative bowl to hold some nuts or bananas or wrapped candies on your table? Probably. It’s not toxic any more than many other plastics. It’s not like polymer clay will ruin your food. But in general, polymer clay is just not suited for making food-contact items. It’s vinyl modeling putty, not a food-bowl-making material!
Covering Cutlery and Glasses with Polymer Clay
But you see lots of times where polymer clay is used to cover the handles of cutlery or the outsides of glasses. Is polymer clay safe for that? Yes, it is absolutely safe to use polymer clay in this manner. As long as it’s not a food-contact region, you’re fine. So go ahead and decorate your wine glasses and coffee cups. Go ahead and make big chunky handles for children’s cutlery. But leave the polymer clay off of the food-contact region. Leave that area clear so that it can be adequately cleaned and sanitized. Remember that anything decorated with polymer clay needs to be hand washed, too. The dishwasher isn’t kind to any hand-decorated art kitchenware!
Use Clay Dedicated Tools
If you’ll check the label of a bar of polymer clay, the instructions will tell you to use clay-dedicated tools and to wash your hands before eating. That has led many people to fear that polymer clay creates some sort of toxic contamination. First off, let me assure you. Polymer clay has been tested and is certified to be non-toxic. It is not something that’s going to make you sick when used as directed. There’s the key right there. When used as directed.
You see, polymer clay is made from PVC (polyvinyl chloride) and a plasticizer (that makes it soft…many plastics have plasticizers, even chewing gum). And because we use PVC pipes for our water supply, there are well-established tolerances for how much ingested PVC is considered to be toxic. It’s a lot, by the way, so don’t worry. But if a manufacturer didn’t discourage you from using your kitchen tools with clay…and then using them for food again…how could they know how much PVC and plasticizer a customer might ingest? I might be very careful and clean my knife well. But another person might pick up their clay knife, with particles of clay, and cut their kids’ sandwiches. The manufacturer can’t control that!
And because polymer clay isn’t food, and toxic levels are possible if you ate enough of it, they must tell you to wash your hands and use clay dedicated tools. Does that make sense?
If you happen to be claying and walk through the kitchen one time and your hands end up in the bag of chips, I would not be concerned in the slightest. You’re not going to die. But don’t make a habit of it. And you really should wash your hands before eating anyway, right? If you need to use a specific kitchen tool for a project, go right ahead. Just clean it thoroughly before it goes back to the kitchen. And I mean thoroughly. Polymer clay is not water-soluble and won’t come off with a quick wash.
What about Plasticizers?
There is much fear around the term “plasticizers” when it comes to polymer clay. First off, a plasticizer is a chemical that is used to make a substance more “plastic” or soft and bendy. Many plastics have plasticizers. Vinyl hoses have them. Plastic bowls have them. Your shoes have them. Even gum has plasticizer…yes…there are edible plasticizers.
And one of the chemical characteristics of a plasticizer is that it tends to migrate out of the plastic over time (some faster than others). That’s why old plastic becomes brittle. It’s because the plasticizer has evaporated out of the material, leaving it brittle. Years ago, they used plasticizers with a small molecular weight (smaller molecules) that would easily migrate out. Modern plasticizers have much larger molecules and stay put inside the plastic better. That leads to longer life of the plastic. The most modern plasticizers used with polymer clay are locked up between the PVC molecules when they fuse during baking, assuming it’s baked adequately.
One class of plasticizers, called phthalate esters, came under fire back in late 90’s and early 2000’s as being an endocrine disruptor. (Many cancers are affected by endocrine tissue, so this is worrisome.) Because those plasticizers migrate, it was found that it was possible for phthalate esters to be ingested. Of particular concern were baby bottles and children’s toys (because kids chew on their toys). So there was a campaign to eliminate those suspect phthalates in such materials.
In 2009, the US passed a law outlawing specific phthalates in children’s items. And because polymer clay is considered a toy, the formulation was changed and those suspect phthalate esters were no longer the plasticizer used. Several companies, such as FIMO, switched to other plasticizers well before this date.
Be aware that much of the scary information on the internet about the safety of polymer clay, such as a 2002 article written by a Vermont lobbyist organization, are outdated and refer to phthalates which are no longer used.
Many major brands of polymer clay now use a citrate based plasticizer. It is non-toxic, biodegradable, and safe to use in children’s toys, medical products, and any sort of PVC.
Baking Polymer Clay Safely
Of course, discussions of the toxicity of polymer clay always bring up the question of using a clay-dedicated polymer clay oven for baking. This is absolutely and unequivocally unnecessary. Please take a moment to read this safety information provided by Polyform, the makers of Sculpey and Premo. You’ll see that polymer clay does not release toxic fumes when baked properly. Or even when baked a little hotter than directed. (In fact, it’s well-known among pros that baking 10-20 degrees hotter makes the clay stronger, as does baking longer, but only if you are VERIFYING the temp with a themometer.)
When polymer clay burns, however, it does release hydrogen chloride gas, which is caustic and will burn your lungs (but is not exactly toxic). But polymer clay doesn’t burn until it reaches temperatures near 350°F (175°C). So if your oven is accurate, this will not be a concern for you.
For more information on baking polymer clay, including how to get the best results, how to minimize any smells, and how to prevent browning and color change, refer to the tutorial Baking Polymer Clay.
Many people find that the smells from baking polymer clay are unpleasant and some sensitive people might get headaches. If this is a concern for you, then by all means put your clay oven in the garage or porch. And cover your project during baking, taking the pan outside to open it up. But be assured that baking polymer clay does not produce toxic fumes.
This being said, remember that toxicity is situation dependent. Polymer clay is safe to be baked in your home as a hobby or craft material. If you work production-style, you’ll probably want to use professional ventilation. While nobody worries about baking bread at home, a production bakery has industrial-level ventilation, right? Please keep such measures in mind. Your home’s air quality should be taken seriously. I can’t advise you on that. It’s beyond the scope of this website!
Polymer Clay Safety Risks
Polymer clay is a plastic, and as such, isn’t a whole lot different from any other plastic we use in our lives. It is PVC, the very same plastic that is used in our water pipes. But even though polymer clay is tested and certified to be non-toxic, there will always be the question, what if?
What if “they” haven’t discovered yet that one of its components will cause problems years down the line? What if the plasticizers are more toxic than “they” know? Well, you can’t know. Not for sure.
But that’s true for everything. You have to be rational and logical and not give in to scary rumors and myths you might read. Find out the information that you can. Fear has no place here. And take reasonable precautions for your body’s safety, as you hopefully do every day in your life, whether you’re working with polymer clay or not.
Regardless of your chosen hobby, you should be using good ventilation, appropriate protection (gloves or mask), and wash your hands afterward. It’s part of taking care of your body and being healthy. But you have to be logical about it. It’s just plain silly to freak out about “polymer clay contamination” and then ignore the many, many other plastics, industrial adhesives, carpets, and petroleum product outgassing that we encounter each day.
I suppose I could write a philosophical piece here about the risks we take in life. All plastic is nasty stuff, and it probably does cause issues for our bodies. But then so do food-borne illnesses and the dangers of improper food storage. Is it better to store milk in a plastic jug, a paper carton (dioxin), or a glass bottle that might not have been adequately sterilized?
We are surrounded with dangers in life, both by chemicals and by things that happen to us. We do what we can to minimize the risks that we can control. We don’t smoke, we eat organic produce, and we avoid GMO’s. But we use cell phones and breathe exhaust and get into our cars which are filled with plastic. Some risk is unavoidable. But you have to evaluate the relative importance of these risks. And from what I can tell, working with polymer clay as a hobby isn’t a very big monster on this list of risks.
Email is the best way
to get updates
You will LOVE getting this email, which is packed full of polymer clay goodness. About once or twice a month.
144 thoughts on “Is Polymer Clay Safe?”
thank you so much for this article!
I unfortunately used fimo polymer clay without reading the right way of baking it. I did drown a little piece of fimo in a cup of water and baked it in the microwave around 3 minutes. sadly there was a lot of smoke and and the fimo was a little over burned. that was the only time I did it and I didnt clean the microwave. I used the microwave only 5 times to make cheese before reading something about polymer clay being toxic and got very paranoic, and stop using it. should I be worried about something, considering the fimo overburned a little?
ps: the incident happened 4 weeks ago.
As you read in this article, polymer clay is not toxic and should not leave a residue in the oven. Even when it burns lightly as you experienced. It should be fine. You might want to wipe the inside of the oven with a damp cloth is you are seeing smoke or discoloration.
Hi! what an amazing article. I was wondering though if you have any information about baking clay that has been colored with oil paints. As in taking raw white clay, coloring it with blue oil paints, and then baking it, I´ve read a lot about people doing it, but I still wonder if it´s safe
I don’t see any reason why a non-toxic oil paint would become toxic when it’s mixed with polymer clay and heated to the temperatures that we use.
Hello dear Ginger!
Thanks for that helpful article!
I just wanna be sure about one thing.
Let’s say I put the clay in the oven and bake it according to the instructions.
Is it safe to cook meals in that oven afterwards?
I know you said it doesnt release toxic fumes, but i just wanna be sure!
With love, Melina
Yes, it is.
Can I place hot dishes on polymer clay trivets, like a casserole coming right out of the oven that was baked at 350F?
There are no safety issues doing that. But you might find that the polymer may warp.
I have an Atlas Pasta machine. Fifteen years ago I used it (once) to process polymer clay. I wiped the rollers “clean” but the Atlas has sat unused (for anything) since. I want to make pasta but have not because I bought into the message about never eating anything that has touched a tool used for polymer clay.
After reading “clean with rubbing alcohol & wash with hot water” above I think I’m back to making pasta.
Many thanks for your research & the time you devote to sharing it!
Ideally, it would be best to disassemble the pasta machine to reach all the areas and clean any hidden clay completely away. But hey, sounds like you’re back in business!
I like to do a new craft project on New Years Eve and this year I picked up some Sculpey. I normally get paranoid about…well, everything. But I decided to do some research instead of chickening out. Your articles are so helpful and educational and reassuring! My new oven thermometer is currently testing out my oven and I’m excited to put my baby clay succulents in for a bake!
Any tips on using polymer for little plant pots? (I’m still exploring your site so any links or tips is much appreciated.) I’d like to be able to make personalized pots for little cuttings and propagations as gifts. Is that a sound use of oven-baked clay?
Welcome to the world of polymer clay! I think little polymer succulents is a fine idea! As for the pots, polymer clay is vinyl and will therefore be a bit flimsy for making a pot. It will work for small ones, but larger, they get too wobbly. You might prefer to use polymer to decorate small terra cotta pots instead. Or create a polymer cachepot for your plant pots to sit in.
Would it be safe to make ornaments with it that would be in contact with animals? Like decorated waterbowls (outside) and small play house?
Animals are no different than people. Polymer clay is vinyl. It is not toxic. But it doesn’t make a good waterbowl because it’s not the right material for that kind of thing.
what if the water pass throught the clay?, does it drinkable?
Polymer clay is plastic. Water cannot pass through it. Polymer clay is a craft medium. It’s not used for creating pipes.
I had a small concern using polymer clay, I had used plastic boards to work on with the clay and thought I would be able to clean them in the dishwasher. Needless to say they came out as dirty as they went in. Now my concern is that the polymer clay will be throughout the dishwashing system and make it unsafe to use on my food dishes. Can you advise please? The clay on the boards had not been baked but the boards were used as a surface for modelling on.
Polymer clay is not poisonous. If you’re worried, you could always wash your dishes by hand.
First, thank you so much for this article, your tutorials, and your blog. All so helpful, inspiring and enjoyable.
As someone who was around when all the VERY OFFICIAL looking DIRE warnings came out before 2007, I appreciate your attempts to reassure a nervous public, and I refer to your article here whenever I backslide and get a little paranoid. I can understand how Miss C truly might panic, thinking she could be putting her family at some kind of health risk after using the family dishwasher to clean a poly clay work surface.
I have an image in my mind of a poor housewife putting crime scene tape all over this dishwasher and outlining it in chalk on the kitchen floor.
I assume your response was somewhat tongue-in-cheek, possibly reflecting the realistic need to avoid frivolous legal issues from giving advise that might be viewed as too broad without some kind of caveat.
I’m assuming on just-from-an-opinion point of view, a couple of really hot washings cycles in an empty dishwasher would put YOUR personal comfort level to the point of not having to “3 mile island” that dishwasher and require washing all dishes going forward by hand forever and ever, amen?
Hello! Thank you for this article! I want to make children toy items with polymer clay, but I do want to shade them. I am confused whether it is possible to make an item and seal it with something that is safe for children, waterproof preferably, but at least durable? Maybe a layer of liquid clay (but it will be hard to cover the whole piece with it), and then a food grade wax, but it seems that wax will be not that durable.. i am just very lost on this..
Use a polyurethane varnish made for wood. Varathane or Polycrylic are both good. Learn more here: https://thebluebottletree.com/testing-polymer-clay-sealers/
Hi Ginger, thanks for this article.
I see you mention that the citrate based plasticizers in Polymer Clay are biodegradable. Do you know if the other ingredients in Polymer Clay are also biodegradable?
I’m hoping that the whole, baked, finished product is entirely biodegradable.
Thanks, Emma
Hi Emma, no, unfortunately, polymer clay is not biodegradable. It is vinyl plastic and chemically very similar to a shower curtain, aquarium tubing, or beach ball.
Thanks so much for this good article, I got a lot of information.but I have a question about baked polymer clay .is safe touching baked clay or not?for example if I make dolls with this clay and touch them after bake , should I wash my hands for eating food or not??
Polymer clay is not toxic. And once baked it’s no different than any other vinyl, like a baby doll or a shower curtain.
I make Springerle cookies using replicated molds, most made of resin or wood.
I would like to make ornaments using my molds and am wondering if the molds would still be safe to use for making cookies afterwards. Also, what do you suggest I use to clean the molds afterwards?
Thank you so much for all the info.
Because the wood will absorb the oils and plasticizer from the polymer clay, I don’t recommend doing this. You can’t clean them well enough to make them usable with food again.
Further question about molds. I understand about the wood molds. What is your advice regarding plaistc (polycarbonate) and silicone moulds?
Polymer clay will mar polycarbonate. Regardless of the material, you should never use molds for food after they’ve been used to mold another material.
When using the family oven to bake polymer clay, how long must you wait between baking the clay and baking food in the oven? Are there any cleaning steps that should be done between uses? I read cleaning the oven with baking soda thoroughly between uses is recommended. Thank you!
You can read all kinds of things on the internet, and not all of it is true. 🙂 There is no scientific basis for cleaning the oven with baking soda between curing polymer clay and baking food. That’s just one of those things people say to try to be helpful. Polymer clay is not toxic and leaves no residue in the oven. You can bake your food right away. There might be a residual odor just as there’s an odor in the oven when you bake anything. So airing it out might be helpful, but not strictly necessary.
Thank you for this info! I am doing preliminary research into the world of pc to find out if it’s a skill I want to get serious about for ball-jointed doll accessories, and I found this article incredibly well done and enlightening. Thanks for putting the time into this. 🙂
Pingback: Wissenschaftliche Betrachtung: Was ist eigentlich Fimo und wie giftig ist es wirklich? | Lenyeds Kämmerchen
I had to laugh when I read this post and found out that you are a microbiologist. It explains the thoroughness of your research. Yesterday, I started to wonder if there really were problems with polymer clay touching food and whether the fumes emitted while baking the clay really were harmful. I thought to myself, “I’ll check the Blue Bottle Tree. Ginger always does thorough research.” Now I know why.
Thank you for setting the record straight. BTW I am quite new to polymer clay and have found your blog to be really helpful.
Ha! Yes, I got my degrees in biology/microbiology and then taught college for a while and then worked in molecular biology research. So I do have a compulsion for getting as close to the truth as I can. Welcome to the world of polymer clay. It’s great fun and you’re going to love it!
Hi there
I need help, I recently made small items with polymer clay and put it in my oven, unfortunately I read the instructions wrong and had the oven up way to high, resulting in smoke coming out the oven and the clay items burnt, I quickly opened all the windows and doors in my house and covered my mouth and nose while doing so. I’m worried now after reading things online that I’ve burnt my throat with the fumes or if I’ll be ok.
Can anyone she’d some light, I am one of those people that reads enough of something and believe it’s happening to me and suffer from anxiety. Am I right to be worried
No, you’re fine. While burning anything (cigarettes, campfire smoke, etc) is not good to breathe, burned polymer clay doesn’t create a serious health hazard in this situation. You did the right thing. Long or repeated exposure would not be good, but what the chemists have told me is that once the air clears it’s perfectly safe.
It’s common for people to say that polymer clay gives off “extremely toxic fumes” and while they think they’re being helpful, that’s an exaggeration. Avoid burning your clay. But if it happens, open the windows and leave the room til the smoke clears.
Thanks so much for this article. I must admit, I’m one if those scared cats. Good to know it’s not as bad as I thought! However, if I were to cover the snout (?) of a teapot, with hit streaming over the polymer clay, would that be considered too much?
It wouldn’t hurt you, but the tea getting down underneath the clay (between the clay and the pot) and could cause it to separate and deteriorate.
Not only did I find your article regarding the safety of polymer clay enlightening, I thoroughly enjoyed reading the comments afterward. Thank you so much for your time and energy in providing our community with your expertise and experience.
My pleasure. I’m glad you found it helpful and interesting.
Great Article! Thank You! this gave me the exact info I was looking for!
Hello everyone. I’m here just to ask a few questions for self interest. if you could provide useful information that would be wonderful, if you can’t then that okay.well here’s my situation…I’m a 14 year old boy and I’m trying to do research for my (two) snakes. I’m wandering if it would be safe to use polymer clay to build a water bowl for them to drink out of. My main issue is: is it safe for snake and/or reptiles in general. I would really appreciate a quick response, seeing as I dont have much free time due to the fact that i am now a freshmen -_- Thank you in advance for reading this/ answering this. Have an amazing day. 😀
Baked polymer clay is not toxic. But it is not a material that is easily cleaned and disinfected. I would use a glass bowl and perhaps decorate the underside of the bowl with polymer clay.
Thank you so much! This finally put me at ease. But I was wondering, what would be the proper way to clean tools after using them on polymer clay? For instance, I’ve been itching to use dough cutting tools on clay but I was worried they wouldn’t be kitchen-safe afterwards, even if cleaned. So does common detergent manage to do the job at cleaning or is there some other cleaning agent more suitable?
Polymer clay isn’t toxic, so you just need to make sure to remove the oily coating that clay can sometimes leave. I would clean the tools with rubbing alcohol, wiping all areas of the tool with a paper towel. Then wash in hot soapy water. Because this is a pain in the neck to do on a regular basis, it’s best to have a separate set of tools for working with clay. But not strictly necessary.
Hi, Ginger
Rozz Hopkins here ! I’ve been working with PC for 30 plus years now. And I love it. At about 20 years into it, my friends asked “aren’t you a bit worried about the effects it may be having on your body”? Well, that did pose a reasonable question. I went to my Dr. Had her do blood work. Testing for polyvinyl chloride. None was found.
With this testing , from a more than qualified *Independent Labratory* ( hehe) I believe that Now, this age old question may be put to rest. Of course I would not eat directly from a bowl made from the “Clays” place a doily or a sheet of waxed paper inside if you’d like to serve from it. Dry items only. That is my belief. Hope this clears some confusion.Take good care.
Thank-you, Ginger! This really helped clear up my concerns over polymer clay. You definitely have a talent for explaining things. I was wondering what your thoughts were on baking polymer clay with alcohol inks and/or pigments? Are these safe to bake as well?
I’m not aware of any hazards, that being said, I have no information about the safety of that. Considering that clay bakes at temps that are lower than the incineration point and there are no chemical reactions happening in the oven, I find it unlikely that a previously non-toxic art material would become toxic merely by heating it. Keep in mind that clay cures at temps far below that required to cook food.
I had a small concern regarding polymer clay (sculpey oven baked terracotta) and putting pure essential oils on it. Seeing how essential oils can eat away at plastic, do you think is safe?
I don’t recommend adding pure essential oils to polymer clay. It’s far better to bake a small glass vial inside of the clay, then after baking put some cotton in the vial and some oil. That way it can be scented, but the oil won’t ooze anywhere or make anything sticky.
Comments are closed.