What’s the Best Glue for Polymer Clay?

Ever wonder what is the best glue for polymer clay? Sooner or later when working with polymer clay you’ll need to glue things together. You might have already baked something when you want to add more design elements. Or you might need to add a bail to a pendant. Or perhaps you want to glue earring posts onto some neat little polymer cabochons. Or crystals to a design. What next? What’s the best glue for polymer clay?

I’ve been asking experienced clayers this question for a long time and I’ve received hundreds of responses. I’ve checked out glue websites. I’ve read glue package labels. I wish I could say that I’ve tested all these options. In some ways, I have, through sheer experience (and failure) with many of the products and strategies listed. But to do a side-by-side comparison of dozens of glues on several brands of polymer clay and then evaluate their durability over years would be quite the logistical nightmare. So in this case I just compiled what I’ve learned from all of you and will summarize here. I hope you find it helpful.

What’s the Best Glue for Polymer Clay?

  • To bond uncured polymer clay to another piece, it’s best to use liquid clay or other bakeable glue such as Kato Poly Paste or Sculpey Bake and Bond.
  • To bond two pieces of cured polymer clay that will not be baked again, use a flexible superglue such as Loctite Gel Control, Zap-a-Gap, or Gorilla Glue GEL Superglue.
  • 2-part epoxy is another good glue for use with polymer clay. It can become brittle with age and pop off.
  • To bond metal to polymer clay, it’s best to bake the metal into the clay. Glue will not be reliable for this bond over time.
  • E6000 is highly recommended by others, but it often does not properly set on polymer clay or becomes brittle with age. I think there are better alternatives.
  • To bond polymer clay to wood, paper, or fabric, use a strong white or PVA glue such as Weldbond.
  • There is no perfect glue for all uses. Polymer clay is plastic and can be flexible, making a durable bond challenging.

There Is No Perfect Glue for Polymer Clay

I would love to be able say, “Buy this glue, it’s perfect for all your polymer clay projects!” But I can’t. No one glue or gluing strategy is good for all situations. Every glue has its fans. And every glue has just as many people complaining that it failed.

I’ll talk about specific situations later, but the most common scenario that people want help with is the problem of gluing cured polymer clay to metal, such as when you glue a bail to a pendant. This is a very difficult bond to make. Some glues don’t cure fully when used on polymer clay, or they degrade the clay and make it sticky. So a glue that works fantastic on another material doesn’t necessarily work great on polymer clay. Also, polymer clay is flexible and metal isn’t. So while a rigid glue like super glue works great on metal, it’s notorious for popping right off of polymer the minute the piece is subjected to any stress.

The best solution for gluing polymer clay to metal is to use a physical bond, not an adhesive bond. In other words, you can’t rely on a glue. For the most secure attachment, you need to find a way to embed the metal into the the clay itself, so the clay is physically holding onto the metal. (More on this further down.) But first, I’ll talk about the glues and other products you can use to bond polymer clay.

Gluing Polymer Clay to Metal or Glass

Learn how to use these glues with polymer clay to get the best results for gluing metal and glass to baked polymer clay.

As I said above, using an adhesive to bond baked polymer clay to metal can be quite frustrating. Many people have found that the bond will fail within a few years and the metal will pop right off. Even when a glue works wonderfully for other applications, you’ll find it quite challenging to get a good long-term bond of baked polymer clay to metal or glass.

Always Prepare the Surface

No matter what glue you use, it’s always best to prepare the surface. Always use alcohol or acetone to remove any surface oils from the baked polymer clay and the metal piece. Make sure the clay is lightly textured, so the glue has something to hold onto. And know that gluing anything to baked polymer that has surface treatments (sealer, mica powder, paints) just will not work. Any glue will bond to the surface treatment, not the baked polymer clay, leading to a very weak bond.

Super Glues

Super Glue is brand name (originally) but has now come to mean a class of glue made from cyanoacrylate. You might see this called “CA” in some groups and forums. CA is a fantastic chemical that can, believe it or not, act as a glue or even a sealer and surface for polymer clay. My pen from Toni Ransfield has a CA finish on it, in fact. CA is crystal clear, cures almost instantly (in seconds), and is notorious for gluing your fingers together. The most common brands of CA, the ones in those little tubes that end up being single-use because the cap glues itself on, are great for bonding ceramic, metal, and glass. But it’s a very brittle glue and doesn’t work well for anything that will flex, such as plastic or rubber. So when used to glue a metal bail to a polymer clay pendant, the bond will eventually fail given enough time and wear.

There are nicer grades of CA glue. There are some that have a flexible gel component to them, so they’re not quite as runny when applied, and tend to hold up better with polymer clay. A product known as Loctite Gel had many, many positive votes from my readers. Another excellent superglue gel is Gorilla Glue Superglue Gel.

Another favorite glue with polymer clay artists is one called Zap-a-Gap, and from what I can tell it’s also a gel-forumulated CA glue.

In general, cyanoacrylate glue cannot be baked because the bond will deteriorate with heat. But Lisa Pavelka’s Poly Bonder is a cyanoacrylate glue that IS formulated to have a strong bond even when baked up to 300°F (150°C).


When someone on a polymer clay on group or forum asks about the best glue for polymer clay, the most commonly recommended product is E6000. It is a clear gel-like glue that you squeeze out of a tube. It’s a superior glue for jewelry-making, in general, and does a fine job of gluing stone cabochons into a metal bezel, for instance. So most crafters have it on hand and are already familiar with it. But when used on polymer clay, it doesn’t seem to perform nearly as well. I have found that it takes a long time to cure, if it does at all, and the bond can easily be pulled apart a month later. That’s my experience. But other people report that the glue cures nicely but then has the same trouble as the CA glues…it is brittle and the bond will pop apart at a later date. If you’re having good luck with E6000, then great. But don’t feel badly if you don’t.

E6000 does have a strong solvent component and is pretty noxious to breathe. While it doesn’t degrade polymer clay, it can give you a headache so make sure you use good ventilation with this one. Know that you cannot bake E6000, the bond will degrade with heat. Also, the shelf life, once opened, of a tube of E6000 seems to be pretty short. If it’s rubbery and gummy coming out of the tube, toss it and buy a new tube.

G-S Hypo Cement

I used to love G-S Hypo Cement. It is a solvent-based glue very similar to E6000, but it comes in a tiny tube with a needle-tip applicator. It’s a wonderful glue for putting a pinpoint of glue on beading thread knots, tiny bits of metal, and when gluing jewelry. But the last several tubes have disappointed me greatly. For one thing, the needle tip seems to come out of the tube. And it behaves in just the way that E6000 does…it fails to cure and stays goopy for a long time. (Note: It does occur to me that the formulation of polymer clay has changed, and perhaps some brands and some colors have something in the clay causes the glues to fail to cure. This is just a guess, but it might explain the wide variation in results. I swear, this glue used to work and now it doesn’t.)

Urethane Glues

You might have used Urethane glues such as Gorilla Glue. In general they expand and foam while curing, making them messy and frustrating to use. But there is a really nice urethane glue called Liquid Fusion. It comes in a bottle, is about the same consistency of honey, has a mild fresh odor, is non-toxic, and dries clear and glossy in about 2-4 hours. Liquid Fusion doesn’t get foamy like Gorilla Glue. In fact, you can use Liquid Fusion as a resin substitute to make a thick clear coat on polymer clay. This dries hard, clear, and durable. I think it holds great promise and would like to explore it further. Let me know in comments if you’ve used this glue.

Epoxy Glues

Epoxies are a general class of adhesives and coatings where you combine equal parts of two resins to create an activated product that hardens within seconds to hours, depending on the formulation. You probably have tubes of epoxy glue in your garage or workshop as it’s an excellent all-around glue for bonding all sorts of things. The simplest epoxy glues are those little tubes, that look like super glue, that you mix together with a toothpick and apply to your project. Epoxy glues are often packaged in a double syringe form that dispenses equal amounts of each resin component. Epoxy glues actually work very well with polymer clay. They bond well and hold tight. But I DO have bond failures with this glue. Perhaps some of the higher quality epoxy glues will work better, such as this plastic-specific epoxy, another one called Devcon, and a highly recommended glue called Epoxy 330.

By the way, you might wonder if Epoxy glue is related to Epoxy resin such as Envirotex Lite. Yes, it is. It’s the very same thing. The difference is the “open time” or the time that the material is workable before the bond starts to set. Epoxy glues can be used as a clear coating, but because their open time is short, there’s not a lot of time for bubbles to rise to the surface and for the surface to self-level as with a coating epoxy resin.

PVA Glues

PVA is short for poly-vinyl acetate, and PVA glue is just white glue. Like Elmer’s Glue-All. Now Elmer’s is a pretty basic glue and not particularly strong or water-resistant (which jewelry needs to be). But there are stronger PVA glues. My favorite is one called Weldbond. I first used it for gluing glass mosaic tiles onto a glass mirror. It works great for that, and it even holds up in the weather. But it’s also a good glue for polymer clay, IF you can get it to stick to the clay without peeling. I haven’t done a lot of work with this, but I have had a couple of people say that Weldbond works great with polymer clay. Your mileage may vary, of course. The beauty of Weldbond is that it’s non-toxic. This is a material that needs to be explored further in the future.

PVA glue is also a nice glue to seal paper boxes and forms if you’re going to cover them with polymer clay. Doing this makes the paper non-porous and gives a surface the clay will bond to easily. It’s also nice when gluing polymer clay to glass. By the way, you can bake PVA glue at polymer clay curing temperatures. Another well-known brand of PVA glue in the polymer clay community is Sobo Glue. Aleene’s Tacky Glue is another well-known PVA glue.

Tip: When applying raw polymer clay to glass, such as covering a wine glass or votive, you don’t need any glue. The clay will stick tightly to the glass. After baking, it should stay fairly well if left undisturbed, but can be popped off if you lift an edge. You can glue the clay back onto the glass, if necessary, with PVA glue. But you do NOT need to use PVA glue to adhere raw clay to glass.

Glue Crystals or Stones to Polymer Clay

This Holo Heart features crystals embedded into the polymer clay. Learn how to make this bond secure.
This Holo Heart features crystals embedded into the polymer clay. Learn to make the Holo Effect with the Holo Effect Tutorial.

When you want to include crystals, gems, or stones in your polymer clay creations, just push them directly into the raw clay, then bake. After baking, you can lift the edge of the stone or gem and it will pop right out. Use your glue of choice and glue it back in, then it will stay permanently. Because the “seat” for the gem is perfectly matching the shape of the gem, the bond will be good with almost any glue. If the foil backing of the gem peels off when  you do that, just glue a new gem back into the hole.

Glue Polymer Clay to Polymer Clay

Learn how to use liquid clay, Poly Paste, and Genesis medium to glue polymer clay.

Perhaps you’ve underbaked a project and a piece has broken off and you need to re-attach and bond two sections of cured polymer clay. Or maybe you want to attach some raw clay to an already baked project. The best solution is always to use a baked bond. There are several materials that are essentially made of the “goop” or base of polymer clay, that can be used to “glue” two pieces together, creating a very strong and stable bond. You do need to rebake the project to cure the “glue”. Since the bond doesn’t happen until the project is baked, you will likely need to support the weight of the two pieces, holding them together in some way, until you can bake the project. What are these materials? You likely have them already.

Liquid Polymer Clay

There are four brands of liquid polymer clay:  Translucent Liquid Sculpey, Kato Liquid Polyclay, Fimo Liquid, and PVClay Gel. All are a thin, slippery-feeling, honey-textured liquid that are essentially the same thing as polymer clay but without the fillers, binders, and pigments. All of these brands bake nearly clear and work well to bond raw clay together, to bond raw clay to baked clay, and can be used to “glue” baked clay together. Because liquid clay can be a runny, though, you’ll get a better results with the next options if you’re needing to bond baked clay to baked clay. Liquid polymer clay can be used for many more applications, though. Gluing is just one many, many uses.

Sculpey Bake and Bond

Sculpey Bake and Bond is quite similar to Translucent Liquid Sculpey but is a bit thicker and more opaque. It’s designed to be exclusively used as a bonding agent and doesn’t work as well in other liquid clay applications.

Kato PolyPaste

Kato Poly Paste is a thick paste made from the same basic materials as the liquid clays, but in the form of a thick paste. It will not run, does not dry out, and will cure by baking. It cures without color, though not completely clear. The big advantage to Poly Paste is that it stays exactly where you put it.

Genesis Thick Medium

The Genesis line of heat set paints and mediums are made of heat-cured (thermosetting) materials very similar to and completely compatible with polymer clay. This line of products is a favorite of polymer and doll artists worldwide. The Genesis Thick Medium seems to be the same product as Genesis Thick Medium – Extender (as far as I can tell, anyway). Thinner than the Kato Poly Paste, and having more of a creamy consistency sort of like mayonnaise, this medium comes highly recommended as being excellent to glue cured clay to cured clay, such as when you attach two halves of a hollow piece together. But remember, like all Genesis products, it must be baked to cure.

By the way, Genesis also works well to bond metal to clay.

Creating a Physical Bond

Learn how to attach a bail to a polymer clay pendant without glue.

As I discussed above, when you glue metal to polymer clay, the bond is likely to be weak. So the best solution is to create a physical bond where the polymer clay itself holds the piece securely. If you want to use a metal bail on a pendant, don’t rely on glue to hold the bail on. Use the polymer clay to surround or cover part of the bail so that it is physically holding the bail. This way it’s far less likely to come off.

This works for barrettes, pin backs, earring posts, glue-on bails, and making polymer settings for glass or stone gems. If you plan ahead, you can make it part of the design. When you add a little tab of clay over a glue-on bail it is a perfect place to put a signature stamp, the year, or a decorative cane slice. I even have used this method for securely attaching button backs to polymer clay buttons.

Get Secret Subscriber Stuff!

More tips, more information, more interesting stuff that will help your polymer journey. No fluff. Plus, it’s free.

151 thoughts on “What’s the Best Glue for Polymer Clay?”

  1. Hi Ginger,

    Oh The Glue dilemma! I have read all the posts, And it appears most glues are hit and miss depending on application. So, I have a ton of Swarovski flat backs I want to use up, on polymer clay. ( I only use hotfix now) but these are not. If I bake the finished piece, and pop out the NON hotfix crystals, can I apply Sculpey Bake and Bond and if so, do I bake again, or air dry?
    Thanks in advance, I have learned so much from you and the forum contributors!

  2. What a helpful article. I do not work with clay, but with decoupaged (paper and glue over) aluminum which I fasten onto steel barrettes. For 3-4 years, E-6000 has worked for me with no failures, until this summer when the steel clasps are coming undone from the decoupaged aluminum. 3-4 years! How many customers I’ve sold these barrettes to and now the product fails? What a shame…. Heart-breaking – I am now experimenting with JB Weld. Enjoyed reading the JB Weld comments. I have watched some very good videos on You-Tube about adhesives and the best one says that the original JB Weld works best (shown in the video ). I also have thinned the product, after mixing, with a bit of acetone so I can use it in a syringe-applicator.

  3. I have read this poat
    And I don’t exactly think you mentioned hot glue
    (I have aspergers.)
    Is hot glue okay to use on baked clay?
    I been looking up steps for a future project I wanna do and an idea was presented by a friend of using piece-by-piece construction with baked clay and hot glue.

  4. I over baked baked a polymer clay sculpture that now has many hairline cracks in it. It did not burn, but I want to seal it before I paint it, to ensure its strength. I cannot find the PC-7 epoxy in my area. I have Weldbond and Liquid Fusion, would either of those be better to use as a light seal coat over the piece to ensure the cracks get filled & sealed?

    1. Polymer clay does not need to be sealed. Just paint it. Also, the cracks are not due to overbaking. They’re due to the project being too thick and having too much thickness being baked at one time. (Next time, do it in layers or stages.) Sealers or varnishes won’t add strength.

  5. Hi all,
    I’m making polymer clay brooches and lapel pins and was wondering what the best glue for this would be? The best one to secure metal brooch backs and metal pins I’m so confused thank you for your time!!

    1. This is addressed in the article when I talked about adding glue-on bails. The best way to attach brooch backs is to use a physical bond. In other words, bake some clay over the center bar.

  6. Hi, Ginger…
    Wondering how I would bond small disks of plain cured clay onto other slightly larger pieces of cured clay which have surface treatments on them, like crackle medium and pan pastels and maybe even an acrylic sealer?

  7. Hi, are you aware of any 3M VHB double sided tapes that will bond cured plymer clay to painted (2 pak) metal surfaces?


  8. I have so many questions. I’m making polymer clay snowman heads and carrot noses. Is the best way to bond the heads and noses together to bake them assembled? And am I to use glue then bake? Or will they bond together just by touching. The final step is to attach to the scoop part of a teaspoon. Should the head be placed on the teaspoon before baking? And which glue, if “yes”, should I use (before baking)? I’ve read through all this fantastic information but still not sure what glue to use. Would a different glue be used if attaching these pieces together after baking?

    1. Hi Carol, you can do it many ways. Raw to raw, then bake, no glue required. Or you can make them separately and glue them after baking. Or you can bake the noses, stick them into the raw heads, then bake.

      I would bake the noses first, then they’re easy to stick into the raw faces. Then bake again. You could add a tiny drop of liquid clay around the carrot before sticking it into the face. But I don’t think it would be necessary.

  9. Ginger, I’m working on polymer clay coasters and want to glue a cork square to the back of the coaster, what adhesive would you recommend for this?

  10. This is my first time using polymer clay, and this website has been such a big help. I was wondering, though, would it be possible to glue polymer clay pieces to a fake pumpkin? If so, how would I do it? Any help you can give me will be greatly appreciated! Thank you in advance.

    1. Sure, no problem. Just bake the clay first, then use glue to attach it to the pumpkin. I would use Weldbond white glue or possibly Gorilla Glue. You could also embed wire into your polymer clay before baking, then wire it to your pumpkin. You’d probably want to drill holes in the pumpkin for the wire. That would hold the best.

  11. Hi,

    My problem is that I have trouble to glue raw clay with… Raw clay ><
    I tried fimo liquid and Sculpey back and bond, but it's not really glued, I can't bend my pieces after baking…
    Do you have any tricks?
    (sorry if my English is not good, hope I'm understandable ^^)

  12. Linda W Howard

    I made a beautiful dragonfly on a mason jar. Baked it at suggested temp and time. All was well until a month later while pacaging for shipment my clay vines started falling off. I glued back on with E6000. What can I do in future so this doesn’t reaccure? I washed dried and then cleaned glass with alcohol before I applied clay. What did I do wrong?

    1. When applying polymer clay to a glass surface, you need to make sure the design wraps around the glass so that all areas of the clay attach to another piece of clay. That way the clay won’t fall off. There’s nothing you can do to prevent this. Even glue will not necessarily keep clay attached to glass over time. Stay tuned, I’ll be writing more about this in the future.

  13. Molly Mave Changilan

    Hello clay masters..im molly from the philippines,,im kinda new in the world of polymer clay..eventhough clay,tools and everything needed to do polymer projects are hard to find in our country..i just love polymer clay..and for years ive been trying to make some projects with just a little knowledge about clay..all my tools before were things inside our house.and i remember when the first time,i badly wanted to buy polymer clay but i didnt know then that it was soooo expensive!..so i practiced on clay dough for children. =( (probably my saddesst day…kidding!).. i realized,i couldnt afford all the things needed to start claying,so i just gave up.but as years passed.i have noticed online that some people are already selling polymer clay,tools and everything ive been dreaming about polymer clay!!!!
    .so i started saving,this is it! After years of saving i finally started a small souvenir/giftshop online. (homebased) and when i started to get orders..and started marketing.i just cant believe problems with polymer clay are indeed endless but so fullfilling when you solve one.esp on your own.but i have this situation that i wanted to ask, how do i stick clay on mugs permanently? .i tried super glue but after putting hot coffee in the mug, the clay fell off.its so frustrating because ive been reading your messages and the glues and brands you mentioned are not available in here.

  14. Thank you again Ginger for this detailed information about glues that work with clay. As always you are doing an awesome job.
    I tried to glue raw clay piece onto my kid’s metal hair clip and then baked. I was having great hope that it will have a strong bong. But unfortunately my clay piece just came off of the clip by a slight pull after its baked. 🙁
    Any idea if it works only on baked clay to stick to the metal, not raw clay?
    Which glue you would use in this case? There was no room for a physical bond in this case. 🙁

  15. I have made several little sheep with white Premo clay. I’ve used Aileene’s Turbo Tacky Glue to glue on small tiny flocking to my sheep. So far everything is okay. I read your article and no mention of using fibers or anything related to fabric. Do you think this will work in the long run? I have E6000 but did not want to use it because it is so messy, stinky and takes for ever to dry. Thank you for your time!

    1. I agree that using E6000 would not be a good strategy, and I agree that using Aleene’s Tacky Glue is a good idea. Generally fiber is best glued to polymer clay by using a white glue or white glue variant. You’re doing fine!

  16. Help please (and quick)?! I have no clue what I’m doing and am giving these gifts tomorrow (but will delay if no answers). I’ve read the full article and all comments. Still need guidance:
    I baked 3″ tall (and 1/2″ thick) clay figurines from Sculpy. Want to attach their flat backs to a flat wooden ornament that has been painted.
    1) What glue to use?
    2) Is there anything I can do now to make them less brittle when dropped? (A) Bake again? Will that make them crack? I originally baked each 20-22 min at 275–package directions said 15 min per 1/4″ and these are 1/8 in some parts and the thickest is almost 1/2. …and if I bake them again, is it ok that I’ve painted accents on them already? (B) Coat in laquer or polyeurethane? Will that change the color? Of course it’ll make them shinier.

    1. Yes, I would bake them again at 275°F, make sure you cover it with foil (a tent of foil is fine) and bake for 45 minutes (after the oven preheats). I can’t guarantee they’ll be super strong, but a full bake will certainly help. Having paint on them shouldn’t matter (though some paints DO change color with baking). As for glue, I would use a glue with substance, something with thickness, such as Liquid Fusion or Gorilla Glue (urethane glue). I would not use superglue as it’s brittle and too thin. You want a glue that will squish in there and hold. Wood glue might work, too, but you’re going to need a good 24-48 hours to dry no matter what glue you choose. I would not varnish them at all unless you have Varathane Crystal Clear on hand (it’s not typically sold locally). Varnishes over paint on polymer get sticky with remarkable frequency.

  17. This is all very new to me but I want to start working with polymer clay too and I have so many questions, but most importantly, there’s one that’s bugging me more than the rest: can metal insertions like 0.7mm wire stick to polymer clay if cured in the oven together? I read about the physical bonding method but I am still confused. What if my metal insertion is not fully integrated in the clay? Like, I don’t want to push the wire all the way through the clay to the outside, I just want to have one part of wire coming out of my clay, while the other end is hidden inside. Can that wire stick to the clay, or will it pop right off after it’s cured?

    1. Yes, you can stick a piece of metal wire into the clay and bake it. The only thing is, the wire will often pull right back out after baking. You can solve that problem by glueing the wire back in after baking. But a better solution is to make a bend or loop in the wire and then insert that into the clay. That way, after curing, the wire won’t come out.

      1. Thank you! I don’t know why I couldn’t think of that, but I guess it was because I was too afraid of a failed project. I am going to start working on my projects as soon as I can spare time! Thank you so much!

  18. Hi, great article! I am definitely saving it 🙂

    I have been using loctite brush on superglue for a couple of years and it’s been great, my jewelry pieces are all in one piece, nothing has fallen off ever. As far back as I can remember customers have never complained about anything coming off. Just the other day my fourteen year old daughter was telling me that it’s incredible how well made the earrings were (two sets of earrings I made), she’s had them for 3 years uses them daily and still they look great and the backs are super tight. I got one of them and was inspecting the back of the earring the metal stud and tried moving it but I failed it is stuck on there very well.

    Maybe it’s luck I don’t know but this glue has worked for me.

  19. Kathay Iskrzycki

    I want to attach clay to a wooden box…do I glue it on after I bake it and what kind of glue do I use or do I bake it on the box, do I still use something between the clay and the box…..then i want to put a finish on it so what do i use…..

    1. I haven’t done a lot of this, so maybe others will have more experienced input to share. You can glue baked clay to a wooden box, and I’d use a strong PVA (white) glue such as Weldbond or Sobo. You can also apply the raw clay to the box and bake it. Glue is used for this in two ways. One, apply PVA glue to the box and let it dry. This gives a slick-ish finish that the clay will hold onto. (Raw clay doesn’t stick to wood or paper very well.) Two, you can use the wet glue (or liquid clay) when you apply the clay. This makes it stay on with sort of a suction action, then during curing it sort of fuses. Superglues will tend to absorb into the wood and not be so good for sticking, by the way.

  20. Hi Ginger!

    First off I loved your article, very informative! I’m a beginner in poly clay work, and so far I’ve made every mistake in the book, but it’s been a really fun learning process. I was just wondering if you had any advice for attaching fur to polymer clay?

    Much appreciated!

  21. Great and informative article, I’ve been making butterflies on wire stems from sculpey and glossy card. I had been using hot glue to stick the body of the butterfly (sculpey) to the wings (card) and it had been going okay until now when I discovered a few of them had come loose. Can you let me know if I’m understanding you correctly; my best option now would be to get that Liquid Fusion glue? Or would I be better to adhere using liquid clay and then bake? Or any other suggestions you have would be much appreciated!!

    1. I think that a urethane glue would work nicely (such as Liquid Fusion or Gorilla Glue), and also a gel superglue such as Loctite Gel Control. Hot glue isn’t really a glue as much as a molten plastic. It doesn’t have much adhesive qualities, especially on non-porous materials (it works great on fabric because of the rough surface). Pretty much any glue will be an improvement for you.

  22. I have a resin cabochon that I need to bond with baked polymer clay (and I can’t use the liquid clay method since I’m going to paint the piece and I need to stick the cabochon after I have painted so that I’ll get to paint all of the details properly, I’ve baked a piece with paint on before and it didn’t turn out good)

    would E6000 or a two-part epoxy be sturdy enough? I am going to glaze the piece, even the cabochon, so I figured that might add extra “attachment” strength 🙂

    thank you!

  23. I would like to bond polymer clay to a glazed ceramic tile (the type intended for a shower wall). Would it be okay to bake on the tile with a bake-able glue or is it better to use a loctite gel type glue to bond post baking the polymer clay? Or would you suggest something else entirely?

    1. Getting a flexible material, such as polymer clay (which is actually vinyl) to adhere to a glossy inflexible surface is one of the hardest bonds to make. I would actually suggest a 2-part epoxy glue such as JBWeld.

  24. This is great and it helped me so much! Thank You! I was wondering what is the best type of glue to use to attach polymer clay to plastic earring posts?

Share your experience and thoughts:

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top

Secret Subscriber Stuff!

There's more by Email.

More tips, more information, more interesting stuff that will help your polymer journey. No fluff. Plus, it’s free.

The website uses (electronic and non-edible) cookies to allow items to stay in your shopping cart, to eliminate banners you've already closed, to allow the social media share buttons to work, to allow you to log in and access your account, and anonymously to analyze traffic. Only anonymous data is shared with other services. You consent to these cookies if you continue to use this website. Thanks!